vape pen Leaking, popping, spitting. It’s all part of vaping, right? It doesn’t have to be that way. There are plenty of things you can do to keep these issues to a minimum. Whether you’re using a regular tank or rebuildable atomizer, these tips will ensure a smooth experience—matter which type of device you have.
There’s nothing worse than spilling your favorite e-juice all over your hands. Recently, manufacturers have been redesigning some of their more recent tanks to combat leaking and other annoying issues like hot pops and spitback. No matter what type of device you have, here’s what you can do to fix it now.
What is in vape pen leaking?
Leaking happens when e-juice escapes from your tank, usually through the airflow system. Depending on the reason behind it, leaking can range from a few drops of e-liquid, to having your tank emptying all of its contents all over your vape mod. It’s a common problem with even the most popular sub ohm tanks. Best sellers of previous years, like the SMOK TFV8 Baby Beast, Uwell Crown III, Sense Herakles and the Aspire Cleito, have been troubling vapers with leaking due to design oversights or common user errors.
While there are a few common culprits, the good news is that there are ways to prevent leaking from happening. First, we will start with some general tips, and then go into more depth depending on the device you’re using.
How to prevent leaking
Check your seal – It sounds obvious, but make sure your tank is fastened together properly. Sometimes if you’re in a hurry, you may cross-thread the top cap or forget to screw it together tight enough. This can cause juice to leak out of the openings. First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully.
Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney. Sometimes you can get e-juice inside this tube by accident, which usually leads to gurgling and leaking. If this happens to you, clean it out with a paper towel before vaping.
Keep your tank upright – Some tanks aren’t built to handle being on their side for long periods of time. E-liquid can start seeping out through the airflow holes if you leave it that way overnight. Try to keep your vape positioned vertically if you’re not using it for extended periods of time. Don’t get into the habit of laying your device down all the time, or you will have to deal with inevitable leakage.
Check for worn or damaged O-rings – A common cause of leaks. Take apart your tank, remove the O-rings and examine them closely. Look for signs of wear and tear, broken or missing O-rings. These things can compromise the air seal of the tank. Thankfully O-rings are cheap, just make sure you get the right size.
Put a lid on it – If you leave a tank without the top cap, it will leak out of the airflow holes. That’s due to the pressurized nature of tanks. Make sure that your tank is empty if you plan on leaving your top cap off for extended periods of time—anything longer than it takes to fill it. Closing the airflow off will work too, but it’s not as foolproof.